1.MCU

PRIMERS

  • Surface tolerant single component, zinc-rich primer
  • Approved for Class B Slip Coefficient.
  • Versatile, easy to use, corrosion resistant primer.
  • Replaces epoxy zinc. Better performance than inorganic zinc.
  • Unlimited recoat time
  • Overcoatable by itself
  • Tolerates flash rusting
  • High DFT tolerance
  • 1 primer for any type of surface prep. including UHP WJ, Dry blasting, wet abrasive blasting, power tool cleaning, hand tool cleaning,

  • Surface tolerant MIO/Zinc filled primer
  • Better surface tolerance than epoxy mastic
  • Outperforms inorganic zinc primers
  • High DFT tolerance and unlimited re-coatable by itself
  • Compatible with most old coatings and different alloys
  • Full or spot primer on hand and power tool cleaned, (wet/dry) abrasive blasted or UHP cleaned surfaces
  • Versatile, easy to use, corrosion resistant primer
  • Does not require Sa 2.5 for maximum performance
  • Tolerates flash rusting
  • Recommend for immersion, splash zone and atmospheric exposure

  • High solids single component based on aluminium pigments primer
  • Most surface tolerance primer
  • Low viscosity, penetrating sealer to replace epoxy penetrating sealers
  • Outstanding abrasion & impact resistance
  • Can be used in combination with any type of surface preparation
  • Intermediate/Topcoat in highly abrasive environments

INTERMEDIATE AND FINAL FINISH

  • MIO filled, refined coal tar MCU.
  • Outperforms coal tar epoxy in all uses.
  • Immerse within 30 minutes with or without the use of MCU-QuickCure in most conditions.
  • Available in black or red oxide colours.
  • Less irritating than conventional coal tar epoxy.
  • Two coat MCU-Ferroguard system passes 5,000 hours prohesion testing on steel
  • On any marine, offshore, hydro, wastewater or other structure exposed to salt or fresh water and sewage treatment.
  • Above or below grade service direct to concrete or steel.
  • Easily re-coatable and repairable.

  • Universal intermediate/barrier coating
  • Coloured topcoat for interior use where there is limited UV exposure and slight ambering is acceptable
  • Aromatic topcoat to replace epoxy
  • High resistance to atmospheric chemicals
  • Best choice in salt or fresh water immersion service.
  • Ideal for use over MCU primers for long term performance in ballast tanks and cargo holds.
  • Free of tar

  • Used as an intermediate/barrier coating for new construction and full removal projects
  • High-solids aromatic intermediate for atmospheric service.
  • MCU-Miomastic contains a proprietary blend of Moisture Curing Polyurea resin and MIO and has many application and performance advantages compared to epoxy mastics.
  • On any marine, offshore, hydro, wastewater or other structure exposed to salt or fresh water and sewage treatment
  • Easily re-coatable and repairable
  • Ideal to use over MCU-Coatings primers for long term performance in atmospheric and interior service

TOPCOATS

  • Semi-gloss aliphatic topcoat.
  • Available in RAL and custom colours.
  • Light stable exterior topcoat for atmospheric use
  • Applies directly to galvanised and other non-ferro substrates

  • MIO modified, low sheen aliphatic topcoat.
  • Recommended for overcoating old coatings.
  • Very durable topcoat for atmospheric service.
  • MIO modification greatly extends coating life and allows easy overcoating for years.

  • Aluminum filled topcoat.
  • Very durable, abrasion and weather resistant topcoat.
  • Outstanding topcoat for restoring weathered galvanized steel.

  • Clear topcoat.
  • Very durable, abrasion and weather resistant topcoat.
  • Light stable exterior topcoat for atmospheric use.

  • High gloss aliphatic finish coat
  • Available in RAL and customs colours.
  • High gloss

  • Luminiscent coating for over more than 8 hours.
  • High durability
  • On shore and offshore use, industrial safety and security applications.

HIGH HEAT

  • Heat resistant coating up to 650° C
  • Anticorrosive primer/finish a two layer system.
  • Finish over MCU-Zinc HH

  • Heat resistant coating up to 420°C
  • Anticorrosive primer under MCU-Aluminium HH

ACCELERATORS

  • Speeds up cure times by 80%.
  • Cure time reduced 30 min. depending on temperature.
  • Pot life still one day when spraying.
  • Increases the DFT tolerance of the MCU-Coatings products.
  • Increases gloss.
  • Adds performance.
  • Increases production.

2.TRADITIONAL PAINT TECHNOLOGIES

  • Inorganic Zinc Silicate Primer
  • Epoxy Zinc Rich Primer
  • Epoxy Zinc Phosphate Primer
  • Epoxy HB MIO Intermediate
  • Epoxy Coal Tar
  • Epoxy Finish
  • P.U. Primer
  • P.U. Acrylic Finish
  • P.U. Aliphatic Finish

3.SPECIALITY COATINGS

FIRE RETARDANT COATINGS

Fire Retarding coating system with Fire Rating upto 120 Mins.